Diese Seite ist im Aufbau – eine deutsche Version folgt in Kürze.
Materials is dissolved/broken up in its strokes/bale stamps and is moved over the horizontal bale breaking auger.
The blades/knifes press the material against a flexible shear bar that holds back the material and prevents the material from blocking. After the shear bar is the material entering down into a metering auger, this can also be delivered as a free opening. Stones and other contamination in the straw is falling into the bottom of the machine and transported below under where the straw enters the horizontal bale breaking auger, here is made an opening in which stones and other foreign objects is pushed into as collection stone trap.
A level sensor in the top of the machine controls the feed table and prevents the machine from being overfilled.
Knifes | kW | Ton/hour |
30 | 4,0 | 1 |
50 | 4,0 | 2 |
108 | 7,5 | 3 |
Adresse
Maskinfabrikken Cormall A/S
Tornholm 3
DK-6400 Sønderborg
CVR: DK-13769699
Kontakt
Telefon: +45 7448 6111
Email: info@cormall.dk
Notwendige Cookies sind unbedingt erforderlich, damit die Website ordnungsgemäß funktioniert. Diese Kategorie enthält nur Cookies, die grundlegende Funktionen und Sicherheitsmerkmale der Website gewährleisten. Diese Cookies speichern keine persönlichen Informationen.
Alle Cookies, die für die Funktion der Website möglicherweise nicht besonders erforderlich sind und speziell zur Erfassung personenbezogener Daten des Benutzers über Analysen, Anzeigen und andere eingebettete Inhalte verwendet werden, werden als nicht erforderliche Cookies bezeichnet. Es ist obligatorisch, die Zustimmung des Benutzers einzuholen, bevor diese Cookies auf Ihrer Website ausgeführt werden.