Straw mill - LSM
More information about products
The LSM hammer mill is made with flails that beats the material against a screen housing with xx mm holes, only particles that are small enough to pass the holes will get out of the housing, this screen can easily and quickly be changed to other sizes depending on the fragmentation required from the straw material. With small screen holes will the capacity also be smaller. This mill has no fan funktion, and all air must be supplied by a ventilator system with filter or cyclone system
Machine function
Welded with reinforced frame to absolve vibrations from straw material. Working
with 5 to 70 mm screen. It needs a suction system with ventilator. With the machine is:
- Including large bended pipe for filling in mill.
- Centre filled and with reversed rotation for usage of backside of the flails.
- Safety guard incorporated with control panel to ensure safe opening of the doors.
PT 100 temp. measure on both bearings also incorporated with control panel.
Screen area 2,6 M2/6
5 | mm |
8 | mm |
10 | mm |
15 | mm |
20 | mm |
30 | mm |
40 | mm |
50 | mm |
70 | mm |